G PUMP Plunger Pump

316L Stainless Steel : EK2210 EK2214 EK2514

Pump body for the die casting aluminium alloy material , have better heat dissipation and mechanical.

Seal material choice of PTFE pan plug seal eyes , butyl rubber , fluorine rubber , according to the different medium temperature matching.

Matching the corresponding models of accumulator application in the film processing system.

316L Stainless Steel : ED2811 ED2821 ED3211 ED3215 ED3221

2205/2207 Duplex Stainless Steel : EDU2811 EDU2821 EDU3211 EDU3215 EDU3221

Three plunger design , to provide efficient volume rate , low pulse effectively improve the reliability of the high pressure sealing.

Three water seal designs and low pressure seal leakage of water , and provide the effect of cooling and lubrication crank case can be used.

According to the PH of medium temperature conditions, it is reasonable to use PTFE packing , PTFE , fluorine rubber , etc.

316L Stainless Steel : ET36 ET40 ET45

2205 Duplex Stainless Steel : ETU36 ETU40 ETU45

Three plunger internal self-lubricating structure , protect the ceramic plunger , low pulse selection.

Unconventional can ET28 type high pressure plunger pump , provide higher pressure

All metal valves check valve body structure of support materials , noise reduction , more lasting working life , better mechanical properties.

Replace to fluorine rubber material and ingredients , resistant to 95°C

316L Stainless Steel : EF28 EF36 EF40 EF45

2205/2207 Duplex Stainless Steel : EFU28 EFU36 EFU40 EFU45

Provide gearbox 1:1 . 25/1 – 1. 5/1 to 1.83

All metal valves check valve body structure of support materials , noise control, more lasting working life , better mechanical properties.

Three water seal designs effectively improve the reliability of the high pressure sealing and low pressure seal leakage of water , and provide the effect of cooling and lubrication.

Low thermal crankcase self-lubrication structure better , super connecting rod load.

Replacing the seal kits can have a heat resistance of 95 °C.